Source for standards, engineering specifications, manuals and technical publications

This choreographies document describes ordering between Buyer and Seller where the Buyer wants to reach an agreement with the Seller about an order. It describes a series of activities that govern communication between the parties and refers to the specifications where information and rules that apply are described.
The various possible behaviours of the Seller and Buyer subsequent to the first order communication are conveyed by variants of this choreography that are described in 5.2.
Previous activities (e.g. cataloguing) and subsequent activities (e.g. invoicing) are outside the scope of this document. If performed electronically, their implementation is covered by other choreographies.
The identifier of this choreographies document is EN 17016-1:2022.
How to claim conformance to this choreography is described in 5.2.3.

This document provides specifications on business processes for exchanging an electronic product catalogues (“catalogues”) as part of the business processes in the post-award area and pre-award area (partially), so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification:
• Processes for submitting catalogues from the selling to the buying side;
• Processes for submitting catalogue-related data as part of tendering processes.
Transaction used in the specified choreographies are out of scope. These transactions are specified in the related transaction specification on “Catalogue Transactions”.

New Work Item for the alignment of EN ISO/IEC 15421:2000 with  the identical adoption of ISO/IEC 15421:2010

ISO/TS 14265:2011 defines a set of high-level categories of purposes for which personal health information can be processed. This is in order to provide a framework for classifying the various specific purposes that can be defined and used by individual policy domains (e.g. healthcare organizations, regional health authorities, jurisdictions, countries) as an aid to the consistent management of information in the delivery of health care services and for the communication of electronic health records across organizational and jurisdictional boundaries.
The scope of application of ISO/TS 14265:2011 is limited to Personal Health Information as defined in ISO 27799, information about an identifiable person that relates to the physical or mental health of the individual, or to provision of health services to the individual.

This document provides general requirements and recommendations on the principles, procedures, and methods for investigating incidents where there have been injuries, illnesses, damage to health, fatalities to consumers, damage to property or environmental damage related to the use of products, services or facilities by consumers.  
NOTE 1 These incidents can occur anywhere.
This document is applicable to any person or any organization of any size, whether it is public, private or community-based.
NOTE 2 This document is not limited to incidents while products, services or facilities are in use, but also includes incidents that occur when products, services or facilities are not in use, such as during transportation or storage by consumers.

This document specifies requirements for hot-dip galvanized reinforcing steel in the form of products which meet the requirements of EN 10080 and subjected, where appropriate, to further processing, e.g. bars, bent bars, stirrups, products straightened from coils, products cut from bars, welded structures and any other components fabricated for use in the reinforcement of concrete.
This document does not apply to hot dip galvanized reinforcement for pre-stressing or components of these reinforcements.

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573-3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573-3, and the temper designations are defined in EN 515.

This document specifies the dimensions, the method of sampling, the preparation of the test specimens and the conditions for performing the tensile test with waisted test specimens in order to determine the tensile energy welding factor.
A tensile test with waisted specimens can be used in conjunction with other tests (e.g. bend, tensile, tensile creep, macro, etc.) to assess the performance of welded assemblies, made from thermoplastics materials.
The test is applicable to co-axial or co-planar heated tool butt welded assemblies made from thermoplastics materials filled or unfilled, but not reinforced. It is not applicable to tubular assemblies with a nominal outside diameter less than 90 mm.

IEC 60966-2-2:2024 is a blank detail specification that relates to flexible coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer or a user.

This document specifies a method for the determination of carbon monoxide (CO) in the vapour phase of mainstream cigarette smoke collected with the smoking regime specified in ISO 4387.

This document provides general requirements and recommendations on the principles, procedures, and methods for investigating incidents where there have been injuries, illnesses, damage to health, fatalities to consumers, damage to property or environmental damage related to the use of products, services or facilities by consumers. NOTE 1 These incidents can occur anywhere. This document is applicable to any person or any organization of any size, whether it is public, private or community-based. NOTE 2 This document is not limited to incidents while products, services or facilities are in use, but also includes incidents that occur when products, services or facilities are not in use, such as during transportation or storage by consumers.

This document specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies. Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges: — ambient temperatures: −25 °C to +70 °C; — water temperatures during operation: 0 °C to +70 °C.

IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc. This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields. NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof. NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.

IEC 61784-5-22:2024 specifies the installation profile for CPF 22 (AUTBUSTM [1]). The installation profile is specified in Annex A. This annex is read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024. [1] AUTBUSTM is the trade name of the Kyland Technology Co., Ltd. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of Kyland Technology Co., Ltd.

IEC 62368-1:2023 is available as IEC 62368-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62368-1:2023 is a product safety standard that classifies energy sources, prescribes safeguards against those energy sources, and provides guidance on the application of, and requirements for, those safeguards. The prescribed safeguards are intended to reduce the likelihood of pain, injury and, in the case of fire, property damage. The objective of the introduction is to help designers to understand the underlying principles of safety in order to design safe equipment. These principles are informative and not an alternative to the detailed requirements of this document.

This document specifies the evaluation methods for size and concentration indices of fine bubbles (FBs) generated through a nozzle. It only applies to FB dispersions (FBDs) in water generated through the nozzle. It describes the sampling method for a FBD from the nozzle into the retention container and the measurements of size and concentration indices. Major applications of the equipment include components of various industrial water systems and consumer baths and kitchens.

2022-02-21: This prAA covers common mods to prEN IEC 62368-1 - PR=74334

IEC 60966-4-1:2024 is a blank detail specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). The creation of a uniform layout and style of detail specifications is determined by the use of a blank detail specification pro forma. The detail specification may be prepared by a national organization, a manufacturer, or a user.